Saeco HD8425/11 User Manual Page 28

  • Download
  • Add to my manuals
  • Print
  • Page
    / 156
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 27
• 28 •
- wash the steam wand with a wet cloth and remove any
milk residue;
- re t the upper part in the steam wand (make sure it is
completely inserted).
Reassemble the external part of the Pannarello.
(Fig.34) - Empty and clean the drip tray every day.
Use a soft, dampened cloth to clean the appliance.
(Fig.20) - Perform the following operations to clean the
pressurized  lter holder:
- (Fig.9) - remove the  lter and wash it thoroughly with hot
water;
- remove the adapter (if any) and wash it thoroughly with
hot water;
- wash the internal part of the pressurized  lter holder.
Do not dry the machine and/or its parts using a microwave
and/or standard oven.
(Fig.35-36) - Clean the seat for accessories with a damp
cloth every week to remove any co ee or dust residues.
Note: do not wash the pressurized  lter holder
in the dishwasher.
11 DESCALING
Limescale builds up with the use of the appliance; the machine
needs descaling every 1-2 months and/or whenever a reduc-
tion in water  ow is noticed. Use the Saeco descaling product
only.
In case of con ict, priority must be given to
what is indicated in the operation and mainte-
nance manual over the instructions provided on sepa-
rately sold accessories and materials.
Use the Saeco descaling product (Fig. B). Its
formula has been designed to ensure better
machine performance and operation for its whole op-
erating life. If correctly used, it also avoids alterations
in the brewed product. Before starting a descaling cy-
cle make sure that: THE WATER FILTER (if used) HAS BEEN
REMOVED.
Never drink the descaling solution or any prod-
ucts dispensed until the cycle has been carried
out to the end. Never use vinegar as a descaling solu-
tion.
1 (Fig.13-14) - Insert the  lter holder into the brew unit (8)
from the bottom and turn it from left to right until it locks
into place.
2 (Fig.1B) - Remove and empty the water tank.
3 (Fig.2) - Pour HALF the content of the Saeco concentrated
descaling solution into the water tank, then  ll the tank
with fresh drinking water up to the MAX level.
4 Turn on the machine by pressing the ON/OFF button (11).
The indicator light (18) turns on.
(Fig.21) - Fill up (as described in chapter 7 of the manual)
2 cups of water (about 150ml each) from the steam / hot
water wand and turn o the machine by pressing the ON/
OFF button (11); the light (18) turns o
5 Let the descaling solution take e ect for approx. 15-20
minutes with the machine turned o .
6 Turn on the machine by pressing the
ON/OFF button (11)
.
(Fig.21) - Fill up (as described in chapter 7 of the manual)
2 cups of water (about 150 ml each) from the steam / hot
water wand. Then turn the machine o by pressing
the
ON/OFF button (11)
and leave it o for 3 minutes.
7 Repeat the operations described in step 6 until the water
tank is completely empty.
8 (Fig.2) - Rinse the water tank with fresh drinking water
and  ll it completely.
9 Place a container under the  lter holder.
10 Switch on the machine by pressing the ON/OFF button (11);
turn the selection knob (17) to the "
" position and, by
means of the  lter holder, dispense the whole content of
the tank. Set the selection knob (17) to the "
" position to
stop dispensing.
11
(Fig.2) - Fill the tank again with fresh water.
(Fig.21) - Place a large enough container under the steam
wand (Pannarello). Open the water dispensing knob (3) by
turning it counter-clockwise.
(Fig.22) - Turn the selection knob (17) to the "
" posi-
tion and dispense the whole content of the tank by means
of the steam / hot water wand.
12 (Fig.23) - After dispensing water, set the selection knob
(17) to the "
" position to stop dispensing.
(Fig.24) - Close the water dispensing knob (3) by turning it
clockwise.
13 Repeat the operations from step (8) once again, for a total
of 4 tanks.
14
(Fig.19) - Remove the lter holder from the unit by turning
it from right to left and rinse it with fresh drinking water.
The descaling cycle is now complete.
(Fig.2) - Fill the tank again with fresh water. If necessary,
prime the circuit as described in section 4.5.
The descaling solution is to be disposed of ac-
cording to the manufacturer’s instructions
and/or the regulations in force in the country of use.
Page view 27
1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 155 156

Comments to this Manuals

No comments