Saeco HD8425/11 User Manual Page 25

  • Download
  • Add to my manuals
  • Print
  • Page
    / 156
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 24
• 25 •
English
selection knob (17) to the " " position and close the knob
(3) by turning it clockwise.
(Fig.2) - Fill the water tank with fresh drinking water.
(Fig.13-14) - Insert the  lter holder into the brew unit (8)
from the bottom and turn it from left to right until it locks
into place.
(Fig.15) - Place a suitable container under the  lter holder.
(Fig.16) - Turn the selection knob (17) to the "
" posi-
tion and dispense all the water in the tank.
(Fig.17) -
Before the tank is totally empty, stop dispensing
and switch the selection knob (17) to the "
" position.
Fill the tank again and wait until the "machine ready" light
(20) turns on.
(Fig.19) - Remove the lter holder from the unit by turning
it from right to left and rinse it with fresh drinking water.
Now the machine is ready. Please see related chapters for oper-
ating details on how to brew co ee and dispense steam.
5 COFFEE BREWING
Warning! During the co ee brewing it is forbid-
den to remove the pressurized  lter holder by
manually turning it clockwise. Danger of burns.
During this operation, the "machine ready" light (20) may
ash; this is to be considered as a standard and not a faulty
operating mode.
Before using the machine, make sure that the hot water/
steam knob (3) is closed and that there is enough water in
the machine tank.
Press the ON/OFF button (11); the light (18) will turn on to
indicate that the machine is on.
Wait until the "machine ready" light (20) turns on. The ma-
chine is now ready for co ee brewing.
Accessories for co ee brewing are placed in
a specially designed seat to make operations
easy and immediate.
If the ground co ee measuring scoop and/or the  lters
are required, lift lid cover (2) and take what you need
(Fig.35 and Fig.36).
If co ee is NOT brewed after turning the selec-
tion knob (17) to the "
" position, turn the
selection knob (17) to the "
" position and check the
"Troubleshooting" table before removing the  lter
holder.
5.1 Using Ground Co ee
(Fig.7) - Insert the  lter (14) in the pressurized  lter holder
(12); the  lter is already inserted when using the machine
for the  rst time.
(Fig.13) - Insert the  lter holder into the brew unit (8) from
the bottom.
(Fig.14) - Turn the  lter holder from left to right until it
locks into place. Release the grip from the pressurized
lter holder. The handle is automatically slightly turned
leftwards.
This movement guarantees proper pressurized  lter hold-
er performance.
(Fig.16) - Preheat the pressurized  lter holder by switch-
ing the selection knob (17) to the "
" position until
some water spills out of it (this is to be done only for the
rst co ee brewing).
(Fig.17) -When 50cc of water have  owed out, set the se-
lection knob (17) to the "
" position to stop brewing.
(Fig.19) - Remove the  lter holder from the machine by
turning it from right to left and pour out any water left.
As the machine is  tted with the special  lter (14), there
is no need to change the  lter to prepare either one or two
co ees.
(Fig.35) - Remove the measuring scoop from the machine.
(Fig.8) - Add 1-1.5 measuring scoop(s) for single co ee
and 2 measuring scoops for double co ee. Remove any
co ee residues from the rim of the  lter holder.
(Fig.13) - Insert the  lter holder (12) into the brew unit (8)
from the bottom.
(Fig.14) - Turn the  lter holder from left to right until it
locks into place.
(Fig.15) - Take 1 or 2 preheated cups and place them
under the pressurized  lter holder. Make sure that they are
correctly placed under the co ee brewing nozzles.
(Fig.14) - Switch the selection knob (17) to the "
" posi-
tion.
(Fig.17) - When the desired quantity of co ee has been
brewed, turn the selection knob (17) to the "
" position to
stop co ee brewing. Wait a few seconds after brewing has
stopped, then remove the cups of co ee (Fig.18).
(Fig.19) - Wait a few seconds after brewing, then remove
the pressurized  lter holder and empty the remaining cof-
fee grounds.
Note: if a small quantity of water remains in the
lter holder, this has to be considered as abso-
lutely normal and is due to the  lter holder features.
Important note: the  lter (14) should be kept
clean to guarantee perfect results. Clean daily
after use.
Page view 24
1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 155 156

Comments to this Manuals

No comments