Saeco aulika SUP040 Operations Instructions download pdf (Page 46)

• 46 •

Machine Installation - Service Provider Manual

PLACE A CONTAINER

UNDER THE

DISPENSING SPOUT

CAPPUCCINATORE RINSING

Place an empty container under the dispensing spout and

press the "

" button (21) to con rm.

CAPPUCCINATORE RINSING

The machine performs a Cappuccinatore rinse cycle.

The bar shows the rinsing progress.

Wait until the cycle stops automatically. The machine will go

back to the normal operating cycle.

Wash all the Cappuccinatore parts as described in section 5.4.

Important note: It is advisable to remove the Cap-

puccinatore from the machine when not being

used, in order to keep it clean.

10.4 Brew Group Cleaning with the

“Co ee Oil Remover System”

As well as weekly cleaning, we recommend running the cleaning

cycle with the "Co ee Oil Remover system" after approximately

500 cups of co ee or once a month.

This operation completes the maintenance process of the brew

group.

Both the "Co ee Oil Remover system" used to clean the Brew

Group and the "Maintenance Kit" may be purchased at your local

dealer or at authorised service centres.

Warning: The "Co ee Oil Remover system" has no

descaling properties. To descale, use the Saeco

descaling solution and follow the procedure described in

the "Descaling" chapter.

The wash cycle cannot be interrupted. Do not leave the machine

unattended during this operation.

Warning! Do not drink the solution dispensed dur-

ing this procedure. The solution must be disposed

of.

Switch to programming mode as described in chapter 9.

Press the " " button (25) and select the "MACHINE MENU"

option.

Press the "

" button (21) to access the menu.

Press the " " button (25) and select the "MAINTENANCE"

option.

Press the "

" button (21) to access the menu.

MACHINE MENU

DISPLAY MENU

WATER MENU

MAINTENANCE

FACTORY SETTINGS

Press the " " button (21) to access the menu.

MAINTENANCE

BREW GROUP CLEAN

DESCALING

CAPPUCCINATORE CLEANING

Press the " " button (21) to access the Brew Group clean-

ing cycle.

PERFORM BREW

GROUP CLEANING?

BREW GROUP CLEAN

YES NO

Note: If this option is con rmed the cycle must be

completed. Press the "

" button (22) to exit.

Press the " " button (21) to start the brew group cleaning

cycle.

REFILL

WATER TANK

BREW GROUP CLEAN

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 52 53

Comments to this Manuals

No comments

Saeco aulika SUP040 Operations Instructions Page 46

Comments to this Manuals

Related products and manuals for Coffee makers Saeco aulika SUP040