Saeco TALEA GIRO Service Manual download pdf (Page 7)

2.1 Product technical data

Power supply and output: 230 V~, 50/60 Hz, 1300 W.

Temperature control: 1 (NTC) variable resistor sensor – transmits the value

to the electronic board.

Safety system: 2 x 175°C manual reset thermostats.

Coffee heat exchanger output:

Stainless steel

1300 W – to dispense coffee, hot water and steam.

Motorized tank only on

Talea Touch and Ring Plus.

24V stepper motor.

Water level

and drip

tray sensor:

Capacitive sensor

Gearmotor: 33VC with 2 directions of rotation.

Cup warmer plate:

Solo Talea Touch and Ring Plus

Activated via MENU display.

PTC Type.

Pump: Ulka reciprocating piston type with thermal cutout at

100°C,

48 W, 230V, 50 Hz, Type EX5 approx. 13-15 bars.

Pressure relief valve: Opening at approx. 18-20 bars.

Water ﬁlter: In tank.

Coffee grinder: DC motor with ceramic plate

grinders.

Solenoid pilot: 15 VA.

Coffee dose control: Hall sensor – Pulse control. Dose adjustment can

be set from approx. 7 to 10.5 g.

Absorption: During heating phase- approx. 5.6 A.

Dimensions: l x h x d in mm: 300/375/410

Weight: 10 kg (average).

Water tank capacity: 1.7 l.

Coffee container capacity: 250g coffee granules.

Coffee grounds drawer capacity:

Heatex changer capacity: Approx. 10 cc.

Water circuit ﬁlling time: Approx. 15 sec on ﬁrst ﬁlling cycle.

Heating time: Approx. 45 sec.

Dispensed drink temperature: Approx. 73°C - 83°C

Grinding time: Approx. 8-10 sec.

1/4

TALEA Section 02

REV00 - August 06

1 2 3 4 5 6 7 8 9 10 11 12 ... 59 60

Comments to this Manuals

No comments

Saeco TALEA GIRO Service Manual Page 7

Comments to this Manuals

Related products and manuals for Coffee makers Saeco TALEA GIRO