Saeco HD8942 Operations Instructions download pdf (Page 38)

Select the menu option.

Press the "OK" button to con rm.

Pour the entire content of the Saeco

concentrated descaling solution into the

water tank, and then  ll the tank with

fresh water up to the MAX level.

Then, press the "OK" button.

Warning: Once this selection is made, the

whole cycle will have to be completed.

Press the "OK" button to con rm or "ESC"

to exit

BOILER DESCALING CYCLE MENU

Descaling should be performed every 1-2 months or when the machine displays the relevant message. The machine must be on to perform

this cycle; it automatically controls the distribution of the descaling solution.

In case of con ict, priority must be given to what is indicated in the operation and maintenance manual over the

instructions provided on separately sold accessories and materials.

DO NOT LEAVE THE MACHINE UNATTENDED DURING THIS OPERATION.

WARNING! NEVER USE VINEGAR AS A DESCALING SOLUTION.

Only use the Saeco descaling solution, especially designed to respect the technical features of the machine, to ensure its performance

will not decrease with time, and for a safe and risk-free use. The descaling solution is to be disposed of according to the manufacturer’s

instructions and/or regulations in force in the country of use.

Note: Before starting a descaling cycle make sure that:

1. THE INTENZA WATER FILTER HAS BEEN REMOVED

2. A container of adequate size or a couple of containers are available and are placed in the points identi ed

DESCALING AND/OR RINSE CYCLES CANNOT BE STOPPED; ALL THE PHASES MUST BE COMPLETED. IF THE MACHINE IS

SWITCHED OFF OR IN CASE OF POWER FAILURES, THE INTERRUPTED CYCLE MUST BE REPEATED FROM THE BEGINNING.

HOWEVER, CYCLES MAY BE PAUSED BY PRESSING THE "PAUSE" BUTTON; IT WILL BE POSSIBLE TO RESUME THE CYCLE AT

ANY TIME BY PRESSING THE "START" BUTTON.

TURN THE SBS DIAL ALL THE WAY TO THE LEFT, COUNTERCLOCKWISE SEE PAGE 8, BEFORE STARTING THE CYCLE.

Note: During the descaling cycle, some alarm messages may appear to allow for a correct management of the machine.

After resetting the message, always press the "START" button to resume the descaling cycle.

CARAFE CLEANING

DESCALING

CARAFE CLEAN

MAINTENANCE

OK ESC

START DESCALING

FILL TANK WITH

DESCALING SOLUTI

1 2 ... 33 34 35 36 37 38 39 40 41 42 43 ... 51 52

No comments

Saeco HD8942 Operations Instructions Page 38