Saeco HD8942 Operations Instructions download pdf (Page 21)

1 2 3

CAPPUCCINO / LATTE MACCHIATO / CAFE LATTE

PRODUCT BREWING

AT THE BEGINNING OF THE DISPENSING PHASE, THE MACHINE MAY PRODUCE SOME SPURTS OF MILK AND

STEAM: RISK OF SCALDING! ALWAYS WAIT FOR THE CYCLE TO END BEFORE REMOVING THE CONTAINER.

REFER TO THE SECTION "MILK CARAFE USE" SEE PAGE 12.

Place the cup or the container where the

milk-based product will be prepared.

Rotate the handle upper part of the

container on the cup. To avoid spilling

milk, always use cups of adequate size.

Select the desired milk product by

pressing the corresponding button: you

can select only one milk product at a

time.

The machine starts brewing. It grinds the

co ee and heats up for milk dispensing.

In this case the ECOMODE function is set

to "ON" (see page 26).

When brewing milk products, the machine dispenses the milk  rst and then brews the co ee.

In this case, simultaneously brewing a double product is not possible.

CAPPUCCINO

PLEASE WAIT …

CAPPUCCINO

STOP

CAPPUCCINO

STOP

Milk dispensing begins. This operation

can be stopped by pressing "STOP".

The machine requires a certain waiting time because the ECOMODE function is activated to allow energy saving.

Preparing cappuccino and other milk beverages can be a quicker operation if the ECOMODE function is deactivated; this, however, at the

expense of energy saving.

This function can only be deactivated by means of the "MACHINE MENU" (see page 26).

Once milk has been dispensed, the

machine starts brewing the coffee. This

operation can be stopped by pressing

"STOP".

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 51 52

No comments

Saeco HD8942 Operations Instructions Page 21