Saeco HD8942 Operations Instructions download pdf (Page 17)

1 2 3

4 5 6

The machine is equipped with a carafe allowing for optimal milk frothing for the brewing of

tasty cappuccinos, latte macchiatos and any milk-based beverage.

Note: Before using the carafe, make sure it is thoroughly clean and sanitary. If

milk is left in the carafe, make sure it is still suitable for food consumption before

using it.

The container allows for an easy and practical steaming and frothing of milk. The container

can be easily removed from the machine after each use so that it can be placed back in the

refrigerator.

The brewing circuit is automatically washed by an automatic cleaning cycle after each use.

This automatic cleaning cycle works only if active (see page 31) and can be also manually

started by pressing the "CLEAN" button next (see page 17).

The carafe must be removed at least once a week to allow for proper cleaning of all

components and keep all parts fresh for optimum brewing. (For proper cleaning, refer to the

"MILK CARAFE CLEANING" section see page 41).

Remove the protection cover from the

milk container connection and keep it in

a clean place. It is suggested to insert it

in the water cover seat.

Rotate the handle clockwise to

disengage the lock.

Press the disengage buttons to allow the

lid removal.

Fill the carafe with cold milk. Fill milk to

above the "MIN" line, but do not exceed

the "MAX" level indicated on the carafe.

MILK CARAFE USE

Place the lid back and ensure that it is

closed correctly. Move the handle back

to its central position to allow for perfect

closure.

Insert the carafe inclined towards the

front.

The carafe base should be positioned on

the hole (E) located on the drip tray.

A = Carafe holes

B = Carafe pins

C = Machine couplings

D = Guides for carafe pins

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 51 52

No comments

Saeco HD8942 Operations Instructions Page 17