Saeco RI9833/11 User Manual download pdf (Page 37)

• 37 •

English

DESCALING

Limescale normally builds up with the use

of the appliance.

The machine must be descaled when the

icon appears on the display.

Important note: It is recom-

mended to refer to the next

section, “Remarks on Descaling”, for

some tips about keeping the machine

in perfect working order.

Do not turn the machine o or

put it in stand-by mode during

the descaling process.

Only use the Saeco descaling

solution. Its formula has been

designed to ensure better machine

performance and operation for its

whole operating life. If correctly used,

it also avoids alterations in the brewed

product.

Warning! Never drink the

descaling solution or any pro-

ducts dispensed until the cycle has

been carried out to the end. Never use

vinegar as a descaling solution.

Before descaling, remove the Pannarello

(if supplied) from the steam wand as de-

scribed in the “Cleaning and Maintenance”

section.

• Turn the machine on by pressing the

“STAND-BY” button. Wait for the

machine to finish its rinse cycle

and warm up.

Warning! Remove the “Inten-

za”  lter (if installed) before

adding the descaling solution.

• Pour the entire content of the Saeco

concentrated descaling solution into

the water tank, and then  ll the tank

with fresh drinking water up to the

MAX level. Place the tank back in the

machine.

1 Place a container below the steam

wand.

Use a container of at least 1

litre capacity. If you do not

have a container of this capacity,

once it is  lled close the knob, empty

the container and then place it again

under the wand and repeat the

procedure.

2 Only after adding the descaling solution

in the tank, turn the selector switch

clockwise to position “

”, and then

dispense 2-3 cups of water (approx.

150 ml).

6 When the icon is displayed, rinse the

water tank thoroughly and re ll it with

fresh drinking water.

7 Empty the container used to collect the

liquid dispensed by the machine and

place it under the steam wand.

3 Stop dispensing by turning the selector

switch back to its central position

“ ”.

4 Allow the descaling solution to work for

10 minutes.

5 Repeat steps 2 and 3 at intervals of 3

minutes, until there is no descaling

solution left in the water tank.

8 Turn the selector switch clockwise to

set it to the “

” position . The machine

rinse cycle starts.

Steady on

Steady on

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 87 88

Comments to this Manuals

No comments