Saeco Nina cappuccino Operations Instructions download pdf (Page 9)

• 17 •

English

• When the desired quantity of coffee has been obtained,

turn the selection knob (17) to the "

" position in order

to stop coffee brewing. Wait a few second after brewing

has stopped, then remove the cups of coffee (Fig. 15).

• (Fig.16) - Remove the pressurized portaﬁlter and empty

the remaining coffee residues.

Note: If a small quantity of water remains in the

portaﬁlter; this is absolutely normal and is due

to the portaﬁlter features.

Note for cleaning: Keep the filter of the

pressurized portaﬁlter clean by removing it from

its seat and washing it with drinking water (Fig. 17). Wash

the adapter and the pin of the portaﬁlter, then wash the

portaﬁlter itself.

5.2 Using Coffee Pods

• (Fig.10) - By using a coffee spoon, remove the ground

coffee ﬁlter (11) and the adapter (12) from the pressurized

portaﬁlter (10).

• (Fig.7) - Remove the pin (13) from the pressurized

portaﬁlter (10).

• (Fig.9B) - Insert the pod ﬁlter (14) into the pressurized

portaﬁlter (10).

• (Fig.11) - Insert the portaﬁlter into the brew unit from the

bottom (6).

• (Fig.12) - Turn the portaﬁlter from left to right until it locks

in place.

• (Fig. 14) - Preheat the pressurized portaﬁlter by switching

the selection knob (17) to the "

" position until some

water spills out of it. This is to be done only for the ﬁrst

coffee brewing.

• When 50cc of water have ﬂowed out, switch the selection

knob (17) to the " " position in order to stop hot water

dispensing.

• (Fig.16) - Remove the pressurized portaﬁlter from the

machine by turning it from right to left. Be careful not to

remove the ﬁlter.

• (Fig.9B) - Insert the pod into the portaﬁlter and make sure

the paper of the pod does not overhang the portaﬁlter.

• (Fig.11) - Insert the portaﬁlter into the brew unit from the

bottom (6).

• (Fig.12) - Turn the portaﬁlter from left to right until it locks

in place.

• Take 1 preheated cup and place it under the portaﬁlter;

make sure that it is correctly placed under the coffee

dispensing holes.

• (Fig.14) - Turn the selection knob (17) to the " "

position.

• When the desired quantity of coffee has been obtained,

turn the selection knob (17) to the "

" position in order

to stop coffee brewing, then remove the coffee cup.

• (Fig.16) - Wait a few seconds after brewing, then remove

the portaﬁlter and dispose of the used pod.

Note for cleaning: Keep the filter of the

pressurized portaﬁlter clean by removing it from

its seat and washing it with drinking water (Fig. 17). Then

wash the portaﬁlter.

6 TIPS FOR CHOOSING COFFEE

As a general rule any type of coffee available on the

market can be used. However, coffee is a natural product

and its ﬂavour changes according to its origin and blend;

it is therefore a good idea to try different types of coffee

in order to ﬁnd the most suited to your personal taste.

For optimal results, however, we recommend using

espresso machine blends. As a rule, Coffee should

always come out of the portaﬁlter without any dripping.

The speed of coffee dispensing can be modiﬁed by

slightly changing the amount of coffee in the ﬁlter and/or

by using a different coffee grind.

Saeco recommends using single-dose coffee pods

marked ESE for a tasty coffee and easier cleaning and

preparing.

BEFORE USING THE HOT WATER/STEAM

JET, MAKE SURE THAT THE STEAM SPOUT

(PANNARELLO) IS POSITIONED OVER THE DRIP

TRAY.

7 HOT WATER

Danger of scalding! When brewing starts, spurts

of hot water may come out. The spout can reach

high temperatures: do not touch it with bare hands.

• (Fig.3) - Press the ON/OFF button (2).

• Wait until the "machine ready" light (15) turns on. The

machine is now ready.

• (Fig.18) - Place a container or a teacup under the steam

spout (Pannarello).

• (Fig.5) - Open the knob (4).

• (Fig.6) - Switch the selection knob to the "

" position

(17).

• When the desired quantity of hot water has been

dispensed, set the selection knob (17) to the "

position.

• (Fig.5) - Close the knob (4).

• Remove the container with hot water.

8 STEAM / CAPPUCCINO

Danger of scalding! When brewing starts, spurts

of hot water may come out. The spout can reach

high temperatures: do not touch it with bare hands.

• (Fig.3) - Press the ON/OFF button (2).

• Wait until the "machine ready" (15) light turns on.

• (Fig.19) - Switch the selection knob (17) to the "

position.

• Wait until the light (16) turns on. The machine is now ready

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17

Comments to this Manuals

No comments

Saeco Nina cappuccino Operations Instructions Page 9

Comments to this Manuals

Related products and manuals for Coffee makers Saeco Nina cappuccino