Saeco HD8759/47 User Manual Page 1

HD8759/47www.saeco.com/welcomeRegister your product and get support atwww.saeco.com/welcome4219_460_3143_1_DFU-Simple_A5_v2.indd 1 13/10/15 10:57

ME NU-MENU button = DOWN button: press this button to scroll down throughthe display menu.First installation 1 Slide the drip tray with drip tray cove

Installing the water filter1 Remove the small white filter from the water tank and store it in a dryplace.Note: Please keep the small white filter for

Measuring the water hardnessTo be able to adjust the machine settings to the water in your region, pleasemeasure the water hardness with the water har

Brewing coffee with pre-ground coffeeWhen you brew coffee with pre-ground coffee, use the measuring scoop inthe multifunctional tool supplied to put t

1 Insert the suction tube into the automatic milk frother.2 Insert the automatic milk frother on the rubber grip until it locks intoplace.3 Insert the

1 Remove the automatic milk frother from the steam wand.2 Place a container under the steam wand.3 Press the HOT WATER button. Hot water dispensing st

5 The display shows the following icon to indicate that the machine entersthe descaling cycle. If you want to exit the descaling cycle, press the ESCb

before brewing any beverage. If the cycle was not completed, the machinewill require another descaling cycle to be performed at your earliestconvenien

7 The hook is not correctly positioned if it is still in bottommost position.8 Slide the brew group back into the machine along the guiding rails on t

6 Rinse the pitcher with fresh water and fill it with a half litre of fresh waterfor the rinsing cycle. Empty the container and place it back under th

16 Attach the automatic milk frother to the fitting and make sure it is lockedinto place.17 Attach the suction tube.18 Insert the rubber grip back on

-Fill the water tank with fresh water to the MAX level indication.-The bean hopper is empty. Put new coffee beans in the bean hopper.-The brew group i

-There is too much powder in the brew group. Clean the brew group.-If an error code is triggered, check the section 'Meaning of error codes'

The machine does notturn onThe machine is disconnected. Check if the power supply cord isinserted correctlyThe machine is in DEMOmode. The standby but

The coffee exit duct is dirty. Clean the coffee exit duct thoroughlywith the handle of the multifunctionaltool or a spoon handle.The coffee blend is n

There is still water in the watertank.Empty the water tank before youinstall the filter.There is water under themachine.The drip tray is too full ando

4219.460.3143.1 REV00 www.saeco.com/welcome4219_460_3143_1_Book_Simp_A5_v2.indd 8012/10/15 15:33

English 5

ES PRE SSOES PRE SSO LUNGOMI LK FROT HAROMA STRENGTHME NUHOT WATE R12413141526 2516271920181721 22242389651011712283

EnglishContentsIntroduction 5Important safeguards 6Caution 6Instructions for the power supply cord 7General description 7Important 7Warning 8Caution

coffee beans. To fully benefit from the support that Saeco offers, pleaseregister your product at www.saeco.com/welcome. This user manualapplies to al

Instructions for the power supply cord-A short power-supply cord (or detachable power-supply cord) is to beprovided to reduce risks resulting from bec

Warning -Check if the voltage indicated on the machine corresponds to the localvoltage before you connect the machine-Connect the machine to a grounde

-The machine is for household use only. It is not intended for use inenvironments such as canteens, staff kitchen of shops, offices, farms orother wor