
USER MANUALPLEASE READ THIS USER MANUAL CAREFULLY BEFORE USING THE MACHINE.Register your product and get support at www.philips.com/welcomeEnglishType
8INSTALLATIONProduct Overview19181314202112310 11 12456789151617232224 2725 2826 29
9ENGLISH9General Description1. Grinder adjustment knob2. Pre-ground co ee compartment3. Co ee bean hopper4. Co ee bean hopper lid5. Control panel6
10ENGLISHPREPARING FOR USEMachine PackagingThe original packaging has been designed and constructed to protect the machine during transport. We recomm
11ENGLISH115 Remove the water tank.6 Rinse the water tank with fresh water.7 Fill the water tank with fresh water up to the MAX level and reinsert it
12ENGLISH12 The display shows the stand-by icon. BlackYellow13 To turn on the machine simply press the “ ” button. The display indi-cates that the cir
13ENGLISH132 Press the “ ” button to start the cycle. The machine starts the auto-matic priming of the circuit by dispensing some water through the Cl
14ENGLISHManual Rinse CycleDuring this process you activate the co ee brewing cycle and fresh water ows through the steam/hot water circuit. This t
15ENGLISH15Green Red8 Press the “ ” button to start dispensing hot water. 9 Dispense water until the no water icon appears.10 At the end, ll the wat
16ENGLISHMeasuring and Programming Water HardnessWater hardness measuring is very important in order to de ne the descal-ing frequency and to install
17ENGLISH17Yellow5 Press the “ ” button to increase the value or the “ ” button to decrease the value.6 Press the “ ” button to con rm the setting.Gr
IMPORTANT SAFEGUARDSWhen using electrical appliances, basic safety precautions should always be followed, including the following:1. Read all instruc
18ENGLISH4 Insert the lter into the empty water tank. Press it down until it cannot move any further.5 Fill the water tank with fresh water and rein
19ENGLISH19Green YellowReplacing the “INTENZA+” Water FilterWhen the “INTENZA+” water lter needs to be replaced with a new one, the following icon i
20ENGLISHADJUSTMENTSThe machine allows for certain adjustments so that you can brew the best tasting co ee possible.Saeco Adapting SystemCo ee is a
21ENGLISH211 Press and turn the grinder adjustment knob one notch at a time. You will taste the di erence after brewing 2-3 cups of co ee.2 The refe
22ENGLISHAdjusting the Dispensing SpoutThe height of the dispensing spout can be adjusted to better t the dimen-sions of the cups that you wish to u
23ENGLISH23Adjusting the Co ee Length The machine allows you to adjust the amount of brewed co ee according to your taste and the size of your cups.
24ENGLISHESPRESSO AND COFFEE BREWINGBefore brewing co ee, make sure that there are no warnings shown on the display, and that the water tank and co
25ENGLISH25Espresso and Co ee Brewing Using Pre-Ground Co eeThis function allows you to use pre-ground and deca einated co ee.With the pre-ground
26ENGLISHDISPENSING STEAM/CAPPUCCINO BREWING Warning: Danger of burning! Dispensing may be preceded by small jets of hot water. The steam/hot water wa
27ENGLISH27structions please see the “Cleaning and Maintenance” chapter. Note: After dispensing steam, it is possible to brew an espresso or dispense
CAUTIONThis appliance is for household use only. Any servicing, other than cleaning and user maintenance, should be performed by an authorized service
28ENGLISH4 The following icon is displayed during preheating time required by the machine.Green Yellow5 Pour the desired amount of hot water. To stop
29ENGLISH292 Empty and clean the co ee residues drawer located on the side of the machine. Open the service door, remove the drawer and empty the co
30ENGLISHDaily Cleaning of the Classic Milk FrotherIt is important that you clean the Classic Milk Frother daily or after each use as it preserves hyg
31ENGLISH31Weekly Cleaning of the Classic Milk FrotherThe weekly cleaning is more thorough, since you need to disassemble all the Classic Milk Frother
32ENGLISH4 To remove the brew group, press the «PUSH» button and pull it by the handle. 5 Thoroughly wash the brew group with fresh, lukewarm water an
33ENGLISH3310 Make sure the hook to lock the brew group is in the correct position by rmly pressing the “PUSH” button until it locks into place. Che
34ENGLISHMonthly Lubrication of the Brew GroupLubricate the brew group after approximately 500 cups of co ee or once a month. The Saeco grease for lu
35ENGLISH353 Insert the brew group in its seat until it locks into place (see the “Weekly Cleaning of the Brew Group” chapter). Insert the co ee resi
36ENGLISH3 Put a “Co ee Oil Remover” tablet in the pre-ground co ee compart-ment.Green4 Press the “ ” button to select the pre-ground co ee functio
37ENGLISH37Green12 After rinsing the brew group, insert it again in its seat until it locks into place (see the “Weekly Cleaning of the Brew Group” ch
2ENGLISHCongratulations on your purchase of a Saeco Intelia EVO Focus fully automatic co ee machine! To fully bene t from the support that Saeco o
38ENGLISHDESCALINGThe descaling process takes approx. 35 minutes.Limescale builds up inside the machine during use. It needs to be removed regularly a
39ENGLISH39Yellow2 Remove the Classic Milk Frother from the steam/hot water wand.3 Remove the “INTENZA+” water lter (if installed) from the water ta
40ENGLISH9 Press the “ ” button to start the descaling cycle.RedRed10 The machine will start dispensing the descaling solution at regular intervals. T
41ENGLISH4119 When the amount of water needed for the rinse cycle has been completely dispensed, this icon on the side is displayed. Press the “” butt
42ENGLISHMEANING OF THE DISPLAY ICONSThis machine is equipped with a colour-coded system to make the user’s understanding of the display signals easie
43ENGLISH43Ready Signals (Green Colour)The machine is programming the amount of co ee to be brewed.Co ee brewing using pre-ground co ee in progress
44ENGLISHWarning Signals (Red Colour)Close the service door.Fill the co ee bean hopper.The brew group must be inserted into the machine.Insert the co
45ENGLISH45TROUBLESHOOTINGThis chapter summarizes the most common problems you could encoun-ter with your machine. If you are unable to solve the prob
46ENGLISHMachine actions Causes SolutionsThe machine grinds the co ee beans but no co ee comes out.(See note) There is no water. Fill the water ta
47ENGLISH47 ENERGY SAVINGStand-byThe Saeco fully automatic espresso machine is designed for energy saving proven by the Class A energy label.After 30
3ENGLISHCONTENTSIMPORTANT... 4Safety Instructions ..
48ENGLISHTECHNICAL SPECIFICATIONSThe manufacturer reserves the right to make changes to the technical speci cations of the product.Nominal Voltage -
49ENGLISH49ORDERING MAINTENANCE PRODUCTSFor cleaning and descaling, use Saeco maintenance products only. You can purchase the products at the Philips
50ENGLISH- Co ee Oil Remover CA6704 - Maintenance Kit CA 6706
www.philips.com/saecoThe manufacturer reserves the right to make changes without prior notice.Rev.00 del 15-11-1302EN02
4ENGLISHIMPORTANTSafety InstructionsThis machine is equipped with safety features. Nevertheless read the safety instructions carefully and only use th
5ENGLISH5• Remove the mains plug from the wall socket:- If a malfunction occurs.- If the machine will not be used for a long time.- Before cleanin
6ENGLISH• Children should be supervised to ensure that they do not play with the machine.• Never insert ngers or other objects into the co ee gri
7ENGLISH7• Do not leave water in the water tank when the machine is not used over a long period of time. The water can be contaminated. Use fresh wat
Comments to this Manuals